Hey, i have the same issue with the Game, everytime i try to activate the cheats they toggle back, i tried using them in the campaign and im using the steam version where i bought the game so it isnt cracked, i dont think that the game got patched so the game version should be the newest one and also be the one this trainer is meant to be so im a bit confused on what to do, the trainer for the standard red alert 3 work the only issue i had with both but also with other games, is that wemod doesnt seem to find the game exes and therefore i need to manually ad them, after that starting the game and then alt + tab to wemod to press play seemed to work fine until now, not sure what the issue there is, none of the situations named by the support on this topic do fit with my situation, since i use the steam version and i use the latest version of the game, as far as i know uprising doesnt have an anti cheat that needs to be deactivated and also im not cheating in multiplayer so i dont know what to do
ok so i just bought C&C RA3 and i am looking in my C&C RA3 file to add my new map pack i just got but i dont have the map folder in my C&C RA3 what do i do oh i have windows 7if that helps. I followed all the instructiond but there is no "Map" floder pls help asap if you can
I placed CnCNet in the RA2 folder that I created when I unzipped the file, and opened CnCNet from within the Folder via the preset 9001 port, with no Command Line and to the RA2.exe shortcut in the menu-drop down and upon loading up, instead of taking me to the Network menu it guides me to the Main Menu, and when I click on 'Network' I cannot see any current games being played or any players even though the Website showed that there was 6 online at the time.
After mounting the ra95_allied.iso file (as per above), you can play the game by simply clicking on Start >> Programs >> Westwood >> Red Alert >> Red Alert Windows 95 Edition. (You can drag-and-drop this start menu button to your desktop to make a handy shortcut.)
The installation process above will permit you to play all the Allied missions, the first Soviet Mission and Skirmish. To play the rest of the Soviet missions, you'll have to extract the Soviet disc ISO file and mount it using MagicISO (see above).
ScrollRate=7Save the file. Now to prevent Red Alert from overwriting this setting when you run the game, right-click on REDALERT.INI, click on Properties and click to CHECK 'Read Only' beside Attributes. Click OK to apply and you're all set. This should slow down the scroll rate enough to make Red Alert playable. However, if you find the scroll rate is still too fast, you may want to...
I already installed and followed correctly the instruction, but when i try to play the red alert it says "unable to allocate primary video buffer ABORTING. What is it??? And how do i fix it.. anyone??? PLEase....
I still have the original box of Red Alert ( double cd ) and the Manual-book :oPI installed it on my WindowsXP, and did start it in compatibility-mode 95 after putting the patch-files in the Westwood==>REDALERT map... so far so good... it WORKS..! The movie play's the game works but...........NO SOUND... what now ?
Hey there, my problem is that when I try to run the SETUP.EXE file in windows 95 compatibility mode it gives me an error message that says I need to find an x86 or x64 version of the program. I noticed that I'm not the only one with this problem but I can't see a response that addresses the problem. Can you help me out?
I am installing this through DOSBox, as I have an x64 system, and I was wondering what is the right disk label to use when mounting the disk. I am using the command "mount d c:\path_to_extracted_iso -t cdrom -label redalert_label". I just need to know what to replace redalert_label with so that I don't get the insert CD message.
after installing red alert and reboot my computer. then install the patch. run the patch in the red alert folder.set the exe file in windows 95 mode. still get the massage kernel32.dll problem. i use windows xp sp3.
If you have downloaded origin's free release of CC Redalert 2 and Yuri's Revenge, but have a newer operating system like 8 or 10. Then you have most likely been getting freeze-ups and or slow play at very least. So here you go friends>
3 Locate yuri's game EXE file/ AKA application. It will be under C:\Program Files (x86)\Origin Games\Command and Conquer Red Alert II The file is called gamemd The file is 4,704 KB
I think I got it figured out what the problem is for the Red alert II/Yuri's Revenge. Along using the CC Red Alert 2 / Yuri's Revenge Graphics Patch FIX! Windows 8/10, I also used the compatibility program of Windows 10 built in the RA2MD.exe and the RA2.exe within the RA2 directory. By mistake I found out what works when I kept running the program until it worked with the compatibility program that Windows 10 offers by right-clicking on those 2 programs and trying the wizard, but you don't really have to do that! All you have to do after right-clicking properties on the RAMD.exe and RA2.exe applications in the RA2 folder and selecting the Compatibility tab, 2nd to the general tab, is click the box that says: (Compatibility mode / Run this program in compatibility mode for: ) and select on the drop down menu there: (Windows 7). Also select the box near the bottom: (Run this program as an administrator). I remembered eventually that these games worked very well for Windows 7, the last O.S. I OWNED! Do this the same way for the other application, close the directory or folder, and then try running the game. Hope this works and enjoy!!!
I have the same issue. I bought the entire C&C pack a few months ago. I can get other games to launch, but red alert 3 loads the mini window, but then it just closes with no error. I've been on the phone with tech support (after an hour wait) and after running through some tests I was just told to uninstall and redownload the game. I did that but it didn't help.
i also meet the same problem .I cannot run my red alert 3 on origin ,which makes me annoying .I have already tried countless method ,but they are still useless to wrestle with the problem i face . It claimed that the game required directx 9 or above. In fact, my vision of directx is 12 ,which is the latest vision.Besides, i am sure that my handware would not have problem since my computer is new and i bought it last month.I do not what happen , which makes this diseater .I feel hopeless and helpless .i sincerely hope that someone can help me a hand to solve this problem.Thank you for your kind attention! I feel sorry that i do not stand any chance to help you.
Aimhaven provides all pc gamers around the world the best and latest free steam games for pc by using direct download links and torrent links. Our goal is to satisfy our users and to become your #1 site for cracked free steam games by making downloading easy.
If its an older game you are playing and you are running Windows 7 or Windows 8 it may not work, if you right click the .exe file and choose Properties and then Compatibility you can change this to run in Windows 98/ Windows 2000 etc. You can find more information on the Beginners Help page here
To resolve this issue, copy the D3dx9_25.dll file or the D3dx9_27.dll file from the disc 1 CD/DVD of the game CD/DVD pack to the corresponding game folder. To do this, follow the appropriate steps for your version of Windows:
However, you need to be very careful as plenty of games use this folder to place the save files which hold your in-game process and you should always backup these files. They are either located right there in the folder or in a sub-folder named in a self-explanatory manner. No matter which game you are struggling with, you should always conduct a Google search to see where the files are saved and save them to a different folder before proceeding with the solution.
Is there any code that is good, every one i tried is not good. I need this code when iwant to go into the game, i installed it and i can not get into the game anymore, i crackit,but not work
6. If you wish to play without the CD simply copy all .MIX files from the root of the Covert Ops CD to a directory called CD under the C&C directory. Now execute Command & Conquer with the command: C&C -cdCD
You can run Red Alert without the CD using the RA -CD command BUT Setup.exe also requires the CD and can not be configured with this command. Therefore under DosBox it simply makes more sense to copy the files/directories off the CD that both RA.EXE and SETUP.EXE use and mount that directory under DosBox as a CD.
1. Create a CD directory under your RedAlert Directory2. Copy SETUP\Setup.mix from Aftermath CD to RedAlert SETUP Directory.3. Copy Main.mix file from root of Aftermath CD to the CD directory.4. Mount the CD as mount d C:\Westwood\RedAlert\CD -label CD4 -t cdromThe LABEL is REQUIRED!
In some cases, Russian state-sponsored cyber operations against critical infrastructure organizations have specifically targeted operational technology (OT)/industrial control systems (ICS) networks with destructive malware. See the following advisories and alerts for information on historical Russian state-sponsored cyber-intrusion campaigns and customized malware that have targeted ICS:
Russian state-sponsored APT actors have used sophisticated cyber capabilities to target a variety of U.S. and international critical infrastructure organizations, including those in the Defense Industrial Base as well as the Healthcare and Public Health, Energy, Telecommunications, and Government Facilities Sectors. High-profile cyber activity publicly attributed to Russian state-sponsored APT actors by U.S. government reporting and legal actions includes:
WDigest authentication was used in older versions of Windows Server and stores plaintext passwords in memory. Because Microsoft focuses heavily on backward compatibility, this method of authentication is actually enabled by default on Windows operating systems prior to Windows 8 and Windows Server 2012 R2. Even worse, it is actually used as part of the process for domain authentication, meaning anytime a user on the network uses RDP to remote into a computer, SMB to authenticate to a file share, or physically enters their password into a console when WDigest is enabled, their plaintext credentials are stored in the memory space of the LSASS process and can be extracted by attackers. 2b1af7f3a8